Products

We are engaged in importing and supplying a wide range of Flanges that is available in variables sizes for different applications in waterworks, petrochemicals, refineries, chemical industry and construction works. Owing to its high quality, optimum performance, less maintenance, our range of flanges is appreciated by our clients and is available in material configurations of stainless steel, carbon steel, alloy steel, nickel alloys and copper alloys. Based on the sizes, dimensions, shapes and length of these flanges, we can customize the products for our respected clients.

We are looking Enquiries from Gulf, Brazil , Russia and African countries.

SS Pipes And Tubes

Worldwide demand for stainless steel is increasing at a rate of about 5% per annum. Annual consumption is now well over 20 million tones and is rasing in areas such as the construction industry and household appliances. New uses are being continuously found for the attractive appearance, corrosion resistance, low maintenance and strength of stainless steel. Stainless steel is more expensive than standard grades of steel but it has greater resistance to corrosion, needs low maintenance and has no need for painting or other protective coatings. These factors mean stainless steel can be more economically viable once service life and life-cycle costs are considered.

ASTM A 312 TP 304L, UNS S30403, 1.4306, X2CrNi19-11

Chemical Composition,% (max)
C Mn P S Si Cr Ni N
0.04 2.00 0.05 0.030 1.00 18.0-20.0 8.0-13.0 -
Tensile Properties
Y.S(Min) T.S(Min) Elongation(Min)% Grain Strcuture
Ksi[Mpa] Ksi[Mpa] L T Not Specified
25[170] 70[485] 35 25
Annealing Requirements
Heat Treating Temp(min)
1900°F[1040°C]

ASTM A 312 TP 304, UNS S30400, 1.4301, X5CrNi18-10

Chemical Composition,% (max)
C Mn P S Si Cr Ni N
0.08 2.00 0.05 0.030 1.00 18.0-20.0 8.0-11.0 -
Tensile Properties
Y.S(Min) T.S(Min) Elongation(Min)% Grain Strcuture
Ksi[Mpa] Ksi[Mpa] L T Not Specified
30[205] 75[515] 35 25
Annealing Requirements
Heat Treating Temp(Min)
1900°F[1040°C]

Seamless & ERW Steel Pipes

Banking on our enriched industry experience, we are engaged in offering a huge gamut of Seamless & ERW Steel Pipes. These electric resistance welded (ERW) pipe is perfectly suitable for your project needs. ERW pipe cold formed from a ribbon of steel pulled through a series of rollers and formed into a tube which is fused through an electric charge.

LSAW Steel Pipes

Leveraging on our state-of-the-art infrastructure facility, we are engaged in offering a huge gamut of LSAW Steel Pipes. These LSAW welded pipes manufactured by us, are flawlessly manufactured by our team of experts in the most accurate manner. The LSAW Welded Pipes are widely used in various industries among which we are listed as the prime Manufacturer and Supplier of LSAW welded pipes.

Seamless Steel Pipes

We offer a huge array of Seamless Steel Pipes to use in different industrial application. We offer these premier quality Seamless Steel Pipes as per the diverse requirements of various industries. Taking into account the ever changing needs of our international clients, we offer these high grade Seamless Steel Pipes with unique features and higher efficiency. These seamless steel pipes are available in the following specifications:-

Technical Specifications :

  • Size : 15 mm NB to 300 mm NB
  • Sch. & Swg : Sch. 5s, 10s, 40s, 80s, 160s, XXS
  • Form :Round, Square, Rectangle, Oval, Coil, Flexible Pipe, Shaft,'U' Shape, etc.
  • Length : Standard length & In Cut length also.

Grades :

  • Stainless Steel : TP 304, 304H, 304L, 304LN, 316, 316H, 316L, 316LN, 316Ti, 309, 310, 317L, 321, 347, 409, 410, 420, 430, 446, 202.

Specifications :

  • Cupro Nickel : 90/10, 70/30, 66/30/2/2
  • Hastelloy : C-4, C-22, C276, B-2
  • Nickel : 200 / 201 / 205
  • Monel : 400 & K500
  • Inconel : 600, 601, 625 & 825
  • Incolloy : 800, 800H
  • Alloy 20, Duplex Steel, SS 904L.

ERW Steel Pipes

Our company is engaged in offering a wide array of ERW Steel Pipes as per client's requirement. These ERW (electric resistance welded) steel pipes are available in various qualities, wall thicknesses, and diameters of the finished pipes. We take into account the prevailing trends and standards set by the industry and offer suitable range of ERW Steel Pipes. These ERW Steel Pipes are available at economical price range to gain total client satisfaction.

Specifications :

  • Size : 15 mm NB to 600 mm NB
  • Sch. & Swg : Sch. 5s, 10s, 40s, 80s, 160s, XXS
  • Form : Round, Square, Rectangle, Oval, Coil, Flexible Pipe, Shaft,'U' Shape
  • Length : Standard length & In Cut length also

Grades :

  • Stainless Steel : TP 304, 304H, 304L, 304LN, 316, 316H, 316L, 316LN, 316Ti, 309, 310, 317L, 321, 347, 409, 410, 420, 430, 446, 202.
  • Cupro Nickel : 90/10, 70/30, 66/30/2/2
  • Hastelloy : C-4, C-22, C276, B-2
  • Nickel : 200 / 201 / 205
  • Monel : 400 & K500
  • Inconel : 600, 601, 625 & 825
  • Incolloy : 800, 800H
  • Alloy 20, Duplex Steel, SS 904L.

Welded Steel Pipes

With the constant support of our expert team, we are engaged in offering a huge assortment of Welded Steel Pipes. These Welded Steel Pipes are highly demanded in the international markets for their unique features such as durability, efficiency, optimum quality and precise engineering. These Welded steel pipes are used in a number of applications where high demands are set on reliability, strength and corrosion resistance.

Specifications :

  • Size :15 mm NB to 600 mm NB
  • Sch. & Swg : Sch. 5s, 10s, 40s, 80s, 160s, XXS
  • Form : Round, Square, Rectangle, Oval, Coil, Flexible Pipe, Shaft, 'U' Shape
  • Length : Standard length & In Cut length also.

Grades :

  • Stainless Steel : TP 304, 304H, 304L, 304LN, 316, 316H, 316L, 316LN, 316Ti, 309, 310, 317L, 321, 347, 409, 410, 420, 430, 446, 202.
  • Cupro Nickel : 90/10, 70/30, 66/30/2/2
  • Hastelloy : C-4, C-22, C276, B-2
  • Nickel : 200 / 201 / 205
  • Monel : 400 & K500
  • Inconel : 600, 601, 625 & 825
  • Incolloy : 800, 800H
  • Alloy 20, Duplex Steel, SS 904L.

Seamless & ERW Pipes

These Seamless & ERW Pipes are mostly used for fencing, scaffolding, engineering purposes and line piping. They can withstand to high temperatures. They are demanded by our clients for their resistance corrosion, optimum performance and their sturdy construction. They are made according to the industrial norms and conditions. We offer these at reasonable prices in the market. We manufacture these using high quality materials.

Specifications :

  • Size :15 mm NB to 600 mm NB
  • Sch. & Swg : Sch. 5s, 10s, 40s, 80s, 160s, XXS
  • Form : Round, Square, Rectangle, Oval, Coil, Flexible Pipe, Shaft, 'U' Shape
  • Length : Standard length & In Cut length also.

Grades :

  • Stainless Steel : TP 304, 304H, 304L, 304LN, 316, 316H, 316L, 316LN, 316Ti, 309, 310, 317L, 321, 347, 409, 410, 420, 430, 446, 202.
  • Cupro Nickel : 90/10, 70/30, 66/30/2/2
  • Hastelloy : C-4, C-22, C276, B-2
  • Nickel : 200 / 201 / 205
  • Monel : 400 & K500
  • Inconel : 600, 601, 625 & 825
  • Incolloy : 800, 800H
  • Alloy 20, Duplex Steel, SS 904L.
Type Grade
Stainless Steel & Duplex 316L, 316, 201, 202, 303, 304, 304L, 309, 310, 310s, 321, 347, 904L, 410, 420, 430, Hastelloy, 904, Titanium, Duplex Alloy 2205, Duplex Alloy 2205 Code, Duplex Alloy 2304, Duplex Alloy 2507
High Nickel Alloys Inconel 718, Inconel 751, Inconel X750, Inconel 722, Inconel MA 954, Monel 400, Monel 401, Monel 404, Monel 502, Monel K500, Monel R405, Nickel 201, Nickel 205, Nickel 211, Nickel 220, Nickel 230, Nickel 233, Nickel 270
Copper Alloy UNS NO. C 92200, UNS No. C 83600, UNS No. 70600, 71500, C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30), UNS NO C 10100, C 10200, C 10300, C 10800, C 12000, C 12200
Alloy Steel F5, F9, F11, F12, F22, F91
Carbon Steel ASTM / ASME A 53 GR. A & B, ASTM A 106 GR. A, B & C, A 333 GR 1 & 6, API 5L GR. B, API 5L X 42, X 46, X 52, X 60, X 65 & X 70.

Stainless Steel Pipes

We are engaged in offering the most sought after range of Stainless Steel Bars. These are made of high quality stainless steel material. Stainless steel round bars find numerous applications in the construction industry as well as other commercial applications where strength reinforcement is necessary and forms a vital part of the construction. Metal bars are used to create various items such as nuts and shafts.

  • Diameter : 6.0-400mm
  • Standards : GB, JIS, DIN, ASTM
  • Grade : 316, 316L, 317, 317L, 309L, 310S, 347L, 321, 301, 304, 304L, 305, 904L, 2205, 630, 631, 632.